What Is EN ISO 27065? Understanding C1, C2 And C3 Levels For Pesticide Protective Clothing
Nov 13, 2026
When selecting protective clothing for agricultural workers, one question matters more than the appearance or fabric weight of a coverall: how well does the garment protect the wearer from pesticide exposure?
A general chemical protective coverall may offer protection against liquid splashes, but pesticide application involves specific exposure conditions. Workers may handle diluted spray solutions, prepare concentrated products, clean contaminated equipment or enter treated areas after spraying. Each activity can create a different level of risk.
This is where EN ISO 27065 becomes important.
Unlike general chemical protective clothing standards, EN ISO 27065 focuses specifically on protective garments worn by pesticide application operators and re-entry workers. It classifies garments into three performance levels - C1, C2 and C3 - helping buyers understand the protection a garment has been tested to provide.
For PPE importers, distributors and agricultural safety brands, understanding these classifications is essential when sourcing pesticide protective clothing.
This guide explains what EN ISO 27065 covers, how the three protection levels differ, what the testing involves and what buyers should verify before placing an order.
1. What Is EN ISO 27065?
EN ISO 27065 is a performance standard for protective clothing worn by operators applying pesticides and workers re-entering treated areas.
Its full title is:
Protective clothing - Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers.
The standard addresses clothing designed to reduce exposure to liquid pesticide formulations, including products such as insecticides, herbicides and fungicides.
It covers several types of protective garments, including:
- Protective coveralls
- Jackets and trousers
- Aprons and smocks
- Protective sleeves
- Certain forms of headwear and accessories
The standard is relevant to different stages of pesticide handling, not only spraying. These activities can include mixing and loading products, applying pesticides, cleaning contaminated equipment and carrying out re-entry work in treated areas.
For example, a greenhouse worker applying a diluted pesticide may face a different exposure situation from a worker preparing concentrated chemicals before application. A worker entering a recently treated orchard may also encounter residual contamination on plants and surfaces.
A single general-purpose protective garment specification cannot automatically address all these situations.
EN ISO 27065 provides a performance-based classification that helps users and buyers select clothing according to the level of protection required.
What EN ISO 27065 Does Not Cover
An important point for procurement teams is that EN ISO 27065 is a clothing standard, not a complete personal protective equipment system.
It does not replace the need for appropriate:
- Respiratory protection
- Chemical protective gloves
- Protective footwear
- Eye and face protection
It also does not address protection against fumigants.
These items must be selected separately according to the pesticide product label, workplace risk assessment and applicable local regulations.
2. Understanding the Three EN ISO 27065 Protection Levels: C1, C2 and C3
One of the most important parts of EN ISO 27065 is its three-level classification system.
C1, C2 and C3 represent different levels of protective performance. They are not simply product grades assigned according to fabric type, thickness or price.
A higher classification requires more demanding performance evidence.
The following overview describes the classification framework in the published 2017 edition and its 2019 amendment. Buyers should check the applicable edition and certification documentation when evaluating individual products, particularly while the third edition is under development.
C1: Basic Protection for Relatively Low-Risk Conditions
C1 is the entry-level classification within EN ISO 27065.
It is intended for situations where the potential pesticide exposure risk is relatively low. C1 garments can serve as base protective clothing, with additional protective items selected according to the workplace risk assessment.
Under the published 2017 edition and its amendment, the material and seams are assessed for liquid penetration resistance, with a penetration requirement of less than 40%.
The garment must also pass the practical performance assessment.
C1 clothing is not intended for handling concentrated pesticide formulations.
Typical considerations include:
- Lower potential exposure during certain agricultural tasks
- Re-entry work where the assessed risk is relatively low
- Situations where additional protective clothing may be required
For buyers, C1 should not be interpreted as universal protection for all pesticide application activities. The actual application conditions remain critical.
C2: Enhanced Protection with a Balance Between Protection and Comfort
C2 provides a higher level of protection than C1.
It is particularly relevant to buyers looking for protective clothing for agricultural spraying and related work where a higher level of liquid protection is required.
Under the published 2017 edition and its amendment, C2 includes the following material and seam performance criteria:
- Liquid penetration: less than 5%
- Liquid repellency: at least 80%
- Whole-garment low-level spray test, where applicable
The garment must also satisfy the practical performance requirements.
C2 is not intended for use with concentrated pesticide formulations.
A notable feature of this category is its relevance to disposable protective clothing. Single-use C2 garments are commonly associated with nonwoven fabrics incorporating a microporous membrane.
This makes microporous film-laminated nonwoven materials an important construction option for manufacturers developing disposable pesticide protective coveralls.
However, the fabric construction alone does not establish C2 compliance. Both the material and seams must meet the applicable test requirements, and the finished garment must satisfy the relevant whole-garment requirements.
For procurement teams, this distinction is important: a microporous coverall should not be marketed as C2 merely because it uses a particular membrane or coating.
C3: The Highest Protection Level
C3 represents the highest protection level in the classification system.
It is intended for situations where a higher level of pesticide protection is required, including exposure scenarios involving concentrated as well as diluted pesticide formulations.
Under the published 2017 edition and its amendment, C3 includes resistance-to-permeation requirements for garment materials and seams.
The key performance criterion is:
- Cumulative permeation: no more than 1 μg/cm²
C3 garments must also pass the applicable practical performance assessment and, for whole-body garments, the high-level spray test.
This classification requires more than simply preventing visible liquid from passing through the fabric. Permeation performance is also assessed, which is why material and seam testing are particularly important.
For manufacturers, achieving C3 can involve more demanding material selection, seam construction and product validation.
For buyers, C3 documentation should be examined carefully to confirm that the actual garment model, not just a material sample, is covered by the relevant certification.
C1 vs C2 vs C3: Quick Comparison
| Item | C1 | C2 | C3 |
|---|---|---|---|
| Protection level | Basic | Enhanced | Highest |
| Material performance focus | Liquid penetration | Penetration and repellency | Permeation resistance |
| Key criterion in published 2017 edition | Penetration below 40% | Penetration below 5%; repellency at least 80% | Cumulative permeation no more than 1 μg/cm² |
| Whole-garment spray assessment | Practical performance | Low-level spray test | High-level spray test |
| Concentrated pesticide formulations | Not suitable | Not suitable | Suitable within the standard's intended scope |
Note: This is a simplified procurement overview, not a substitute for the complete standard, its test tables or a product's certification documents. Requirements for partial-body garments differ from those for whole-body garments.
3. How Is EN ISO 27065 Protective Clothing Tested?
A product cannot establish EN ISO 27065 compliance through a fabric description or a general chemical protection claim.
The classification is based on defined performance requirements covering materials, seams and the finished garment.
Three areas are particularly important.
3.1 Material Testing
The fabric is assessed to determine how it performs when exposed to the specified pesticide test liquid.
Depending on the required protection level, testing can evaluate:
- Liquid penetration
- Liquid repellency
- Chemical permeation
- Tensile strength
- Tear resistance
The published standard references ISO 22608 for pesticide formulation repellency and penetration testing, and ISO 19918 for measuring cumulative permeation.
These tests address different mechanisms of liquid protection.
Penetration refers to liquid passing through a material or opening. Repellency describes the material's ability to resist wetting and retain less of the test liquid. Permeation concerns the movement of chemicals through a material at a molecular level.
A material that performs well in one test should not automatically be assumed to meet another.
3.2 Seam Performance
Seams are a critical part of protective garment construction.
Even when a fabric provides good liquid resistance, poorly designed or inadequately sealed seams may create potential pathways for contamination.
Depending on the classification, seam performance is assessed for penetration resistance, permeation resistance and mechanical strength.
For disposable coveralls, buyers should pay particular attention to:
- Seam construction
- Seam sealing or taping
- Consistency of production
- Stress points around the crotch, shoulders and underarms
- Areas around zippers and closures
A good fabric specification is only one part of the garment's overall performance.
3.3 Whole-Garment Performance
The finished garment must also be evaluated.
This is important because protective clothing is worn while workers bend, stretch, walk, reach and perform repetitive movements.
The standard includes practical performance assessments, as well as whole-garment spray testing for the relevant protection levels.
In the published classification framework, C2 is associated with a low-level spray test, while C3 requires a more demanding high-level spray test.
This is one reason why buyers should request evidence for the complete garment rather than relying only on a fabric test report.
4. What Is the Difference Between EN ISO 27065 and Type 5/6 Coveralls?
This is one of the most common questions among PPE buyers.
Many disposable protective coveralls already carry Type 5 and Type 6 classifications. Does that mean they are suitable for pesticide spraying?
Not necessarily.
Type 5 and Type 6 classifications address specific forms of protection against hazardous dust and limited liquid spray or splash exposure.
EN ISO 27065, on the other hand, is specifically designed around pesticide protective clothing and its classification requirements.
The standards therefore address different performance questions.
A Type 6 garment may have passed a low-level spray test under its relevant chemical protective clothing standard. That does not independently establish C2 compliance.
Likewise, a Type 4 classification does not automatically establish C3 compliance.
The EN ISO 27065 classification also requires the applicable pesticide-specific material and seam performance evidence.
For buyers comparing products, the distinction is straightforward:
Type 5/6 tells you about performance under specific chemical protective clothing tests. EN ISO 27065 tells you whether the garment meets the defined pesticide protective clothing requirements for its declared C level.
A product may carry both classifications, but each claim must be supported by the appropriate test and certification documentation.
5. How to Choose the Right Pesticide Protective Clothing
Choosing pesticide protective clothing should start with the intended application, not with a supplier's fabric description.
Before requesting quotations, buyers should consider the following factors.
5.1 Identify the Pesticide and Application Conditions
Determine whether the worker will handle diluted or concentrated formulations.
Also consider whether the task involves mixing, loading, spraying, equipment cleaning or re-entry work.
The pesticide label and workplace risk assessment should guide the required protection level.
5.2 Confirm the Required C Level
Do not select C1, C2 or C3 simply because a higher level sounds safer or a lower level is less expensive.
The appropriate level depends on the exposure risk and applicable requirements.
C1 and C2 are not suitable for concentrated pesticide formulations under the published classification framework. C3 is designed for higher protection scenarios, including concentrated formulations.
5.3 Check the Fabric and Seam Construction
For disposable pesticide protective coveralls, buyers may encounter:
- Spunbond polypropylene
- SMS nonwoven fabrics
- Microporous film-laminated nonwovens
- Other coated or laminated protective materials
Each construction has different characteristics in terms of liquid protection, breathability, durability and cost.
However, no fabric category automatically guarantees an EN ISO 27065 classification.
Ask suppliers for relevant material and seam test reports.
5.4 Verify the Certification Documents
A reliable supplier should be able to provide clear documentation identifying the certified product and its protection level.
Check:
- Exact model and product description
- Applicable EN ISO 27065 edition
- Declared C1, C2 or C3 level
- EU Declaration of Conformity, where applicable
- Relevant test reports
- Notified Body information and certificate details
- Product marking and user instructions
The model shown on the certificate or supporting documentation should match the product being purchased.
5.5 Evaluate Comfort and Practical Use
Protective performance is essential, but comfort also affects whether workers can use the garment correctly throughout their shift.
Consider:
Breathability
- Freedom of movement
- Hood and cuff design
- Elasticated closures
- Zipper protection
- Garment sizing
- Compatibility with gloves, boots and respiratory protection
For agricultural work in warm environments, comfort and heat management deserve particular attention.
5.6 Consider Supply Consistency and Private-Label Requirements
For importers and distributors, product performance is only one part of a successful sourcing decision.
A manufacturer should also be able to demonstrate consistent production quality, stable material sourcing, suitable packaging and reliable delivery.
If you are developing your own PPE brand, clarify whether the supplier can support private-label packaging, product identification, size specifications and the documentation required for your target market.
6. What Should Buyers Ask a Pesticide Protective Clothing Manufacturer?
Before placing an order, procurement teams can use the following questions to evaluate a supplier:
- Has the exact garment model been tested or certified according to EN ISO 27065?
- Which protection level does it meet: C1, C2 or C3?
- Which edition of the standard is referenced?
- Are material and seam test reports available?
- Has the complete garment passed the applicable practical and spray performance assessments?
- Does the certification documentation identify the model being quoted?
- What are the garment's intended-use limitations?
- Can the supplier provide consistent production, traceability and private-label support?
A supplier who can answer these questions clearly is better positioned to support a long-term agricultural PPE sourcing program.
7. EN ISO 27065: What Buyers Should Know About the Latest Standard Revision
The standard is also undergoing an important update.
The published reference framework has been ISO 27065:2017 together with Amendment 1:2019.
However, as of November 2026, ISO lists the third edition as ISO/FDIS 27065. It has entered the formal approval stage but remains under development and has not yet been published as the replacement International Standard.
The new edition includes technical revisions, including changes relating to test methods, material and seam performance, conditioning and marking.
For manufacturers and buyers, this development matters.
If you are sourcing certified pesticide protective clothing, ask which edition is referenced in the product documentation.
If you are developing a new product or planning certification, discuss the transition arrangements with the relevant Notified Body or certification organization before finalizing the test program.
Do not assume that a draft edition has already replaced the published requirements.
8. Working with a Reliable Disposable PPE Manufacturer
For agricultural PPE distributors and private-label brands, finding a manufacturer is not simply about comparing fabric weight or unit prices.
The supplier needs to understand the relationship between material performance, garment construction, testing requirements and the intended application.
At LIONCARE, we manufacture disposable nonwoven protective clothing and PPE products for international B2B customers.
Our product portfolio includes disposable coveralls, protective gowns, masks and related accessories, with OEM and private-label support for distributors, importers and PPE brands.
Our existing protective coverall range includes models with different chemical protection classifications. However, these classifications should not be confused with EN ISO 27065 pesticide protection levels.
For customers developing a pesticide-specific product range, the appropriate model, material construction and certification pathway should be evaluated against the intended application and the applicable standard requirements.
We believe that clear technical documentation and product-specific performance evidence are essential to building reliable PPE supply partnerships.
Looking for a disposable PPE manufacturer for your agricultural safety product range?
Contact LIONCARE to discuss your product requirements, OEM options and sourcing plans.
Final Takeaway
EN ISO 27065 gives agricultural PPE buyers a more specific way to evaluate protective clothing for pesticide handling.
Understanding the difference between C1, C2 and C3 helps procurement teams match garment performance to the intended application, verify supplier documentation and avoid relying on general chemical protection claims.
For manufacturers and distributors alike, the most important principle is simple: choose protective clothing based on verified performance and the actual exposure risk - not on fabric descriptions or unrelated certifications alone.
FAQs About EN ISO 27065
Q: What does EN ISO 27065 stand for?
A: EN ISO 27065 is a protective clothing performance standard for garments worn by pesticide application operators and re-entry workers. It establishes requirements for classification, testing and marking.
Q: What are the three levels of EN ISO 27065?
A: The standard classifies pesticide protective clothing into C1, C2 and C3. C1 provides basic protection, C2 offers enhanced protection, and C3 represents the highest protection level.
Q: Is C2 suitable for disposable pesticide coveralls?
A: Yes. Disposable protective clothing using microporous membrane nonwoven materials is commonly associated with C2 applications. However, the actual garment must meet the applicable material, seam and whole-garment testing requirements. Fabric construction alone is not proof of C2 compliance.
Q: Can a Type 6 coverall be considered C2?
A: No. Type 6 classification does not automatically establish EN ISO 27065 C2 compliance. C2 requires additional pesticide-specific performance evidence for materials and seams, as well as the relevant garment testing.
Q: Can C1 or C2 clothing be used with concentrated pesticides?
A: Under the published classification framework, C1 and C2 are not intended for use with concentrated pesticide formulations. C3 is designed for higher protection scenarios, including concentrated and diluted pesticide formulations.
Q: Does EN ISO 27065 cover gloves, masks and boots?
A: No. EN ISO 27065 focuses on protective clothing. Respiratory protection, hand protection and foot protection must be selected separately according to the relevant risk assessment and product requirements.
Q: What documents should I request from a supplier?
A: Request product-specific certification documents, the applicable Declaration of Conformity where relevant, test reports, the declared protection level, standard edition, Notified Body details and manufacturer instructions.
Q: Has the third edition of ISO 27065 been published?
A: As of November 2026, ISO/FDIS 27065, Edition 3, is in the formal approval stage. It has not yet been published as the replacement International Standard. Buyers should verify the latest status before specifying a standard edition in a purchase contract.






